3D Printing - group assignment
Group member: Xin, Min
I happily aggreed to print Min's flying hippo 3D model because I want her to use this opportunity to print something that she likes since I've done 3D printing many times before.
Our experiences:
1. Planning: Before printing, we evaluated the model's printability. I think it looks printable overall. We could try to thicken the wing but its oppotional. Then I told Min that I think it would print the best if hippo's leg is vertical to the ground, even that means the two front legs are lefted from the ground. My theory was that when leges are vertical to the ground, there's less leaning degree and it may be printed more smoothly. I thought the program can easily build the supporting structure of the lefted front left.
2. Min printed the 1st model on her own and told me that surprisingly the back leg broke in half. (see image below)

3. Autumn evaluated the situation and think its an accident and probably will print well next time. With her help we printed again with the same model and the same machine setting. The same leg broken in a same way in the next printing process. One front leg disappeared this time. We stoped the printing at this stage to save some time and material. (see image below)

4. Min remove all the supporting material and notice that one wing is attached to the body as we wanted, but the other wing is not. We leart that even in the 3D model two parts may looks touched to each other, unless it has enough overlapping joints, the 3D Printing machine may recognize it as two seperate parts and print then seperatly. If the printing machine print wo parts seperatly, even if they are touching each other they are not attached to each other, because the printing material of one object cools down and hardened before touching the other object.
5. I suggested that Min could glue the broken leg and wing back. To do that I suggested to use the nail file to file a flat surface on the connecting spot on the wing so the they have enough connect surface to be glued. The leg doesn't need to be filed since the broke surface is smooth and even.
6. Since the model can not stand on its own. Min used the 3D drawing pen to make a small standing support.


Comments
Post a Comment